Archive for » July 23rd, 2009 «

Bluetooth Technical Operations

Bluetooth is a high speed, low powered wireless link
technology that’s designed to connect phones or other
portable equipment together with little to no work
required by the user.  Unlike infrared, Bluetooth
doesn’t require line of site positioning to work.

Current prototype circuits are contained on a board
that is 0.9 cm square, with a much smaller circuit
board being developed.

When one Bluetooth device comes in contact with
another, they will automatically exchange addresses
and details of capability.  Then, they can establish
a 1 MB link with security that they will use as
required.  The protocols involved with handle both
data and voice, with a very flexible topography.

The technology achieves its goal by embedding tiny,
non expensive short range tranceivers into the
devices available today.  The radio operates on the
2.45 GHz frequency band, and supports up to 721
KBps, along with three voice channels.

Each devices offers a unique 48 bit address from
the IEEE 802 standard, with the connections being
point to point or multipoint. The max range is
10 meters, although it can be extended to 100
meters by increasing the power.  The devices are
also protected from radio interference by changing
their frequencies, also known as frequency hopping.

What’s important, is the fact that Bluetooth
devices won’t drain battery life.  The specification
targets power consumption of the device, limiting
the drain on the battery.  The radio chip will
consume only 0.3mA in stand by mode, which is less
than 5% of the power that standard phones use.

Bluetooth will also guarantee security at the bit
level.  The authentification is controlled by the
user via a 128 bit key.  The radio signals can
be coded with anything up to 128 bit.  With the
frequency hopping, Bluetooth is already very
hard to listen into.

The baseband protocol is a combination of both
circuit and packet switches.  Slots can be reserved
for synchronous packets as well.  Each packet
will be transmitted in a different hop frequency.
Normally, a packet covers a single slot although
it can be extended to cover up to five slots.

Bluetooth can also support data channels of up to
three simultaneous voice channels.  Therefore,
it’s possible to transfer the data while you talk
at the same time.  Each individual voice channel
will support 64 KB.

From a technical standpoint, Bluetooth is very
different indeed.  It’s the best wireless method
in the world, surpassing even infrared.  For
communication on the go, Bluetooth is indeed
very hard to compete with.

10 Benefits Of Bluetooth

Below, are 10 benefits and reasons to use Bluetooth
technology.

1.  Wireless
As you probably already know, there are many benefits
and advantages to using wireless devices.  Along with
improving safety as a result of eliminating wires
you don’t need, wireless also offers you plenty of
other advantages.  When traveling with your laptop
or other wireless devices, you’ll no longer have to
worry about bringing connection cables.

2.  Bluetooth is actually inexpensive
The technology of Bluetooth is cheap for companies
to implement, which results in lower costs for the
company.  These savings are then passed from the
company on to you.

3.  Bluetooth is automatic
Bluetooth doesn’t have you set up a connection or
push any buttons.  When two or more devices enter
a range of up to 30 feet of each other, they will
automatically begin to communicate without you
having to do anything.

4.  Standardized protocol
Bluetooth is standardized wireless, meaning that
a high level of compatibility among devices is
guaranteed.  Bluetooth will connect devices to
each other, even if they aren’t the same model.

5.  Low interference
Bluetooth devices almost always avoid interference
from other wireless devices.  Bluetooth uses a
technique known as frequency hopping, and also
low power wireless signals.

6.  Low energy consumption
As a result of Bluetooth using low power signals,
the technology requires very little energy and will
use less battery or electrical power as a result.
This is an excellent benefit for mobile devices,
as Bluetooth won’t drain the battery.

7.  Sharing voice and data
The standard for Bluetooth will allow compatible
devices to share data and voice communications.
This is great for mobile phones and headsets, as
Bluetooth simplifies driving and talking on your
cell phone.

8.  Instant PAN (Personal Area Network)
You can connect up to seven Bluetooth devices to
each other within a range of up to 30 feet, forming
a piconet or PAN.  For a single room, you can
also set up multiple piconets.

9.  Upgradeable
Upgradeable is the standard for Bluetooth.  There
are newer versions of Bluetooth in the works,
which offer many new advantages and backward
compatible with older versions.

10.  The technology stays
Bluetooth technology is a world wide, universal
wireless standard.  With it being as popular as
it is, you can count on it being around for years
to come.  As more and more devices start to use
Bluetooth technology, more manufacturers will be
eager to make their products compatible.  A chain
reaction will occur, making Bluetooth the standard
for cutting edge wireless.

PPPPP